Today was workbench day at the Zemon’s. I built the first of two 2′ x 5′ workbenches that I will use for my BD-4C construction. Believe it or not, this is the first real work table that I have ever had.
This is a relatively small table but should be just right for my space, half of a two car garage. If I need something larger, I will clamp the two tables together in ether a 4′ x 5′ or a 2′ x 10′ configuration. I intend to start with one table as a primary work surface and use the other for the sander, band saw, vice, and a place to spread out the plans.
Here is a link to the plans for the EAA Chapter 1000 Standardized Work Table. As promised in the plans, it is very study. Materials cost for two tables was about $230.
